Plumber jobs in Canada for foreigners.
Plumbers are no. 3 of 8 on the list of trades Canada recruits from abroad.
Updated September 2026

- Job offer signed
- Permit application sent
- Decision expected12-40 weeks
Key facts
- Main permit route
- Temporary Foreign Worker Program (LMIA)
- Processing time
- 12-40 weeks
- Certificates employers ask for
- NVQ Level 3 Plumbing · Gas Safe · WRAS Water Regulations · Red Seal
- Permits issued by
- Immigration, Refugees and Citizenship Canada (IRCC)
What plumbers do in Canada.
Plumbing is a compulsory Red Seal trade in Ontario (trade 306A): only a holder of a Certificate of Qualification, a Provisional Certificate of Qualification or a Registered Training Agreement may do the work. Employers are plumbing and mechanical contractors on new housing, condo towers, hospitals and schools, and service companies that answer repair calls in homes and businesses. Quebec shows the highest provincial median for the trade in Job Bank data, at CAD 40.00 an hour.
On new builds you rough in drain, waste and vent piping, set water lines and install fixtures, then test the system before inspection. Service work means diagnosing leaks, replacing water heaters and clearing drains, driving a van between calls. In British Columbia the trade works to the National Plumbing Code, and the higher levels also use CSA B149.1, the gas installation code, so many plumbers there also do gas piping. BC technical training runs with SkilledTradesBC-designated providers, seats are limited, and a new standardized Level 1 exam launches in September 2026.
Hours and shifts
Ontario sets the plumbing week at a 44-hour overtime line, after which every hour pays 1.5 times the regular rate. Service companies with on-call rotations often use averaging agreements over two to four weeks, which move overtime to 88, 132 or 176 hours across the period.
Every shift longer than 5 hours needs a 30-minute unpaid eating break, which can be split into two by agreement. Between two shifts you get at least 8 hours off, unless the two shifts together total 13 hours or less. Emergency callouts after hours still count toward your weekly total. You also get 24 hours off in a row each work week, or 48 hours over two weeks, and at least 11 hours off each day. Working past 48 hours a week needs your written or electronic agreement, and overtime is still paid on those hours.
Recognition and licence, step by step.
What to do, in order, to work as a plumber in Canada.
- 01
Gather proof of your plumbing hours
Skilled Trades Ontario expects your experience to match the full 306A apprenticeship: 9,000 hours, of which 8,280 are on the job and 720 in school. Collect employer letters that list the systems you installed and how long you worked, because the assessment asks for sufficient and verifiable evidence. - 02
Submit the Trade Equivalency Assessment
Send the TEA application form with your evidence and pay CAD 235 plus HST. If you are not approved, you may apply for reassessment with new documents and references for CAD 100 plus HST. - 03
Write the 306A certifying exam
The Ontario plumber exam is the Red Seal exam: four hours of multiple-choice questions, pass mark 70%. In BC, Red Seal candidates receive the National Plumbing Code 2020 during the exam. Passing leads to your Certificate of Qualification with the Red Seal. In BC, the Level 2 exam needs the National Plumbing Code 2015 or 2020, and Level 3 adds CSA B149.1. - 04
Renew every year in Ontario
Because plumbing is compulsory in Ontario, the Certificate of Qualification is renewed each year and your name appears on the Public Register, where customers and inspectors can check it. - 05
In BC, follow the 6,300-hour standard
SkilledTradesBC sets plumbing at 6,300 hours of work-based training and 30 weeks of technical training over four years. Experienced arrivals can apply as Trade Qualifiers to challenge the certification exam for CAD 120.
Certificates and language.
Contractors ask for the Ontario 306A Certificate of Qualification or the BC Plumber certificate, both carrying the Red Seal. For gas lines, BC's Level 3 plumbing exam covers CSA B149.1, and Ontario gas work is certified separately by TSSA. An NVQ Level 3 Plumbing, Gas Safe registration or WRAS Water Regulations card from the UK is evidence of experience for the TEA, and the Canadian exam then decides your certificate.
- NVQ Level 3 Plumbing
- Gas Safe
- WRAS Water Regulations
- Red Seal
Language at work
Plumbers in Canada read the National Plumbing Code, permits and installation manuals, and explain work to homeowners and inspectors, so service jobs need confident spoken English or French. The Red Seal exam is offered in English and French, and the 306A assessment file must reach Skilled Trades Ontario in a form they can verify.
What plumbers earn in Canada.
Job Bank reports plumbers (NOC 72300, 2023-2024) at CAD 21.00 to CAD 46.00 an hour across Canada, with a median of CAD 34.00, roughly CAD 5,893 a month at 40 hours. Ontario's median is CAD 32.50 and its top band reaches CAD 50.38, against Ontario's minimum wage of CAD 17.95 an hour from 1 October 2026. Quebec's median is CAD 40.00, British Columbia's CAD 32.00 and Alberta's CAD 30.00. Ontario's low band is CAD 20.00, and British Columbia's runs from CAD 23.00 to CAD 48.00. Overtime past 44 hours in Ontario pays 1.5 times the rate.
Before you sign.
Points to settle in writing before you sign a plumber contract in Canada.
- Ask whether you start on a Registered Training Agreement or a Provisional Certificate, since 306A is compulsory in Ontario.
- Ask whether the job includes gas piping, and who pays for the separate TSSA gas certificate in Ontario.
- Check whether the role is new construction or service calls, and whether a company van and fuel card come with it.
- Ask who pays the CAD 235 plus HST assessment and the yearly Certificate of Qualification renewal.
- For on-call work, ask for the averaging agreement in writing and how many weeks it covers.
- Confirm who supplies the press tools, pipe threader and drain machine, and who pays if they break.
Good to know.
- This trade is regulated by each province. Check the certification rules in the province where you will work.
- Express Entry runs special draws for trade occupations, and this trade is one of them.
What plumbers earn in other countries
Typical monthly gross pay for foreign hires, from official statistics and collective agreements.
FAQ
Questions about working in Canada.
What do I need before I can work as a plumber in Canada?
Gather proof of your plumbing hours; Submit the Trade Equivalency Assessment; Write the 306A certifying exam; Renew every year in Ontario; In BC, follow the 6,300-hour standard.
Which language do I need to work in Canada?
Plumbers in Canada read the National Plumbing Code, permits and installation manuals, and explain work to homeowners and inspectors, so service jobs need confident spoken English or French. The Red Seal exam is offered in English and French, and the 306A assessment file must reach Skilled Trades Ontario in a form they can verify.
What is the minimum wage in Canada?
Canada has no single statutory minimum wage. Pay is set by collective agreements for each sector.
Sources
Checked September 2026. Rules change - confirm details with your employer or the authority before you apply.
- Skilled Trades Ontario - Plumber (306A)
- Skilled Trades Ontario - Trade Equivalency Assessment
- SkilledTradesBC - Plumber
- Ontario.ca - Your guide to the Employment Standards Act: Hours of work
- Job Bank - Wages for Plumbers (NOC 72300)
- Immigration, Refugees and Citizenship Canada (IRCC)
- Canada.ca - Program requirements for low-wage positions
Get found by employers hiring for Canada.
One free profile that employers hiring for Canada and your other chosen destinations can find.
Create your profileFree. No subscription. No commission on your wages, ever.