Electrician jobs in Lithuania for foreigners.
Electricians are no. 3 of 10 on the list of trades Lithuania recruits from abroad.
Updated September 2026

- Job offer signed
- Permit application sent
- Decision expected8-20 weeks
Key facts
- Main permit route
- Leidimas laikinai gyventi
- Processing time
- 8-20 weeks
- Certificates employers ask for
- IEC 60364 · BS 7671 (18th Edition) · ECS card · NVQ Level 3 Electrotechnical · Red Seal
- Permits issued by
- Migracijos departamentas (Migration Department)
What electricians do in Lithuania.
Lithuanian electricians work for firms that install and run consumer electrical installations, and for the operators of the distribution networks and the transmission grid. The national electrician programme (Elektriko modulinė profesinio mokymo programa) covers building wiring up to 1,000 V with connection lines and electricity meters, company installations up to 10 kV, cable lines up to 42 kV, distribution networks from 0.4 to 35 kV and transmission lines from 110 to 400 kV. It also has modules on solar photovoltaic plants, wind power plants and KNX/EIB smart building control. Regional Employment Service data show electricians short in the Vilnius region and in Kaunas, Klaipėda and Šiauliai counties.
On an installation crew a week means pulling cable, mounting distribution boards, building lighting and power circuits, connecting meters and testing insulation and earthing. Maintenance posts look after relay protection, automation and drives, which matters in industrial areas such as the Kaunas Free Economic Zone, where automotive component makers work. Network crews work outdoors on cable lines and substations, close to lifting machinery and often at height.
Hours and shifts
Installation work follows the 40-hour standard week. Network and maintenance teams also use standby duty: the Labour Code lets a standby shift last up to 24 hours, counted over a period of at most 2 months, while active duty is counted over up to 3 months. After any shift longer than 12 hours, up to 24, you get at least 24 hours of rest.
Hours beyond your schedule are overtime, which needs your consent except in the extraordinary cases the law lists, and stays within 180 hours a year. Outside standby, the gap between two working days is at least 11 hours. A call-out on a public holiday outside your schedule is paid at least double. The 2026 minimum wage is EUR 1,153 a month.
Recognition and licence, step by step.
What to do, in order, to work as a electrician in Lithuania.
- 01
Compare your level with the Lithuanian programme
The Lithuanian electrician qualification sits at level IV of the national qualifications framework (LTKS). Write a list of the voltage levels and installation types you have worked on, because Lithuanian jobs are split by voltage, from wiring under 1,000 V to 400 kV lines, and bring your diploma and references. - 02
Obtain the electrical safety qualification
To carry out tasks reserved for qualified electrotechnical staff, Lithuanian rules require an electrical safety qualification (apsaugos nuo elektros kvalifikacija), obtained in the way legal acts set. Ask the employer which category the post needs, who organises the check and who pays for it. - 03
Learn the Lithuanian safety procedures
Training covers general electrical safety for work on electrical installations: protective equipment for low and high voltage, safety signs, written procedures for tests and measurements, and organisational and technical measures against electric shock. On network jobs it adds lifting machinery, slinging loads and rules for work at height. - 04
Show proof for renewables and KNX
Solar photovoltaic installation, wind turbine installation and KNX/EIB building control are separate modules in the Lithuanian programme, so they are assessed on their own. If you apply for that kind of project, bring certificates or a list of finished installations for each system.
Certificates and language.
Lithuanian employers look for the apsaugos nuo elektros kvalifikacija in the category the job needs, proof of work on installations under 1,000 V or on 0.4 to 35 kV networks, and training for work at height and with lifting equipment. Training based on IEC 60364 shows you know the international rules for low voltage installations. BS 7671 (18th Edition), an ECS card, NVQ Level 3 Electrotechnical or a Red Seal show your experience, and they sit alongside the Lithuanian electrical safety qualification rather than replace it.
- IEC 60364
- BS 7671 (18th Edition)
- ECS card
- NVQ Level 3 Electrotechnical
- Red Seal
Language at work
This trade needs more Lithuanian than most, because switching instructions, permits for work on live equipment and safety signs must be understood exactly. You also talk with the person who authorises the work before you start. No official CEFR level is published for electricians; ask in which language the safety qualification check is held and what support the employer gives to prepare.
What electricians earn in Lithuania.
No official electrician pay range is on file for Lithuania, so compare offers with two numbers: the 2026 minimum wage of EUR 1,153 a month and the average gross wage of EUR 2,322.2 that Statistics Lithuania reported for the fourth quarter of 2024. Standby duty is where offers differ most, so ask how standby hours and call-outs are paid. A call-out on a public holiday outside your schedule earns at least double. Wages arrive twice a month unless you ask in writing for one payment. Ask whether the employer pays for the electrical safety qualification and the time spent on it.
Before you sign.
Points to settle in writing before you sign a electrician contract in Lithuania.
- The offer says which voltage you will work on: installations under 1,000 V, the 0.4 to 35 kV network or 110 to 400 kV lines.
- Your employer writes down who pays the apsaugos nuo elektros kvalifikacija check and the paid time to prepare for it.
- Standby duty is described: how many hours, how often, and the pay for standby time and for call-outs.
- Insulated tools, voltage testers and protective equipment for low and high voltage are supplied by the employer.
- For solar, wind or KNX/EIB projects, training on that system is part of the job description.
- The base is named, for example a plant in Kaunas or a network crew around Klaipėda or Šiauliai.
What electricians earn in other countries
Typical monthly gross pay for foreign hires, from official statistics and collective agreements.
FAQ
Questions about working in Lithuania.
What do I need before I can work as a electrician in Lithuania?
Compare your level with the Lithuanian programme; Obtain the electrical safety qualification; Learn the Lithuanian safety procedures; Show proof for renewables and KNX.
Which language do I need to work in Lithuania?
This trade needs more Lithuanian than most, because switching instructions, permits for work on live equipment and safety signs must be understood exactly. You also talk with the person who authorises the work before you start. No official CEFR level is published for electricians; ask in which language the safety qualification check is held and what support the employer gives to prepare.
What is the minimum wage in Lithuania?
The statutory minimum wage in Lithuania is €1,153 a month gross (2026).
Electricians are also hired in:
Sources
Checked September 2026. Rules change - confirm details with your employer or the authority before you apply.
- Kvalifikacijų ir profesinio mokymo plėtros centras - Elektriko modulinė profesinio mokymo programa (electrician programme)
- EURES - Labour market information: Lithuania
- EURES - Living and working conditions: Lithuania
- Migracijos departamentas (Migration Department)
- Eurostat: Monthly minimum wages (earn_mw_cur)
Get found by employers hiring for Lithuania.
One free profile that employers hiring for Lithuania and your other chosen destinations can find.
Create your profileFree. No subscription. No commission on your wages, ever.