Electrician jobs in United Kingdom for foreigners.

Foreign electricians in United Kingdom typically earn £3,200 a month gross. Electricians are no. 1 of 7 on the list of trades United Kingdom recruits from abroad.

Updated September 2026

Electrician at work
Photo: Sid Mbog · CC BY-SA 4.0
Pay and the minimum wageGross pay a month.

Minimum wage 2026£2,065

  • Typical pay£3,200

How long it takesWeeks from a signed job offer to a decision on the permit.
  1. Job offer signed
  2. Permit application sent
  3. Decision expected4-12 weeks

Key facts

Typical pay
£3,200 a month gross
Main permit route
Skilled Worker visa
Processing time
4-12 weeks
Certificates employers ask for
IEC 60364 · BS 7671 (18th Edition) · ECS card · NVQ Level 3 Electrotechnical · Red Seal
Permits issued by
UK Visas and Immigration

What electricians do in United Kingdom.

Electrical work in the UK is split between domestic jobs in homes, commercial fit-outs in offices and shops, and industrial installation and maintenance in factories, data centres and plants. Occupation code 5241, Electricians and electrical fitters, also takes in solar panel installers, electric vehicle charging point installers, street lighting work and electro-mechanical technicians. Employers range from small contractors wiring new houses to national firms on hospitals, rail and energy projects.

A normal week means first fix and second fix on site, running containment and cables, wiring boards, and testing and certifying your circuits. In homes, replacing a fuse box or changing electrics near a bath or shower needs building regulations approval, which is usually handled through a firm registered with a competent person scheme. On commercial and industrial sites you work to BS 7671, the UK wiring regulations, and ECS says a full gold card is needed for anyone working unsupervised on a UK construction site. Every circuit you install or alter ends with inspection, testing and a certificate that the customer or client keeps.

Hours and shifts

The going rate for code 5241 assumes a 37.5-hour week and is pro-rated if your contract says more or less. Electrical contractors often add overtime at the end of a project or on weekend shutdowns in shops and offices that must stay open in the week. By law your average stays at or below 48 hours over 17 weeks unless you sign the opt-out, you keep 11 hours of rest between shifts, and any regular night installation of 3 hours or more between 11pm and 6am makes you a night worker with an 8-hour average limit. Overtime and travel rates are set by your contract.

Recognition and licence, step by step.

What to do, in order, to work as a electrician in United Kingdom.

  1. 01

    Check your qualification is a craft vocational one

    The ECS gold card for an Installation, Maintenance or Domestic Electrician needs a craft vocational qualification or a completed apprenticeship. A degree alone does not meet it. Gather your trade certificate, transcript and proof of work experience.
  2. 02

    Get an Ecctis Industry Skills Statement

    ECS asks for a full Ecctis Industry Skills Statement for qualifications from outside the UK; a simple Statement of Comparability is not enough. The Skills Mapping version costs GBP 435 + VAT and takes about 30 working days after Ecctis has all documents and payment.
  3. 03

    Complete the Electrotechnical Experienced Worker Assessment

    Colleges and training providers in England, Wales and Northern Ireland run it; in Scotland the Scottish Joint Industry Board deals with applications. It covers the Experienced Worker Qualification Level 3 units, BS 7671:2018 (18th Edition), Level 3 Initial Verification and the AM2E or AM2ED assessment from National Electrotechnical Training.
  4. 04

    Pass the ECS Health, Safety and Environmental Assessment

    Take it online through MyECS with a webcam, or at a centre. A pass lasts two years, and within that time you apply for your card or sit it again.
  5. 05

    Apply for the ECS gold card

    Upload all certificates and evidence to your MyECS account; ECS says processing takes 2 to 3 weeks. Your employer or training provider verifies the application. With only an Ecctis statement you may get an AQP card for support roles, which does not cover unsupervised electrical work.

Certificates and language.

UK contractors ask for the ECS gold card, issued by the Joint Industry Board, which stands on an NVQ Level 3 Electrotechnical or an equivalent assessed through the Experienced Worker route, the AM2E and the BS 7671 (18th Edition) certificate. Inspection and testing certificates help for maintenance roles. IEC 60364 training from home is a good base, because BS 7671 is built on it, but it does not replace the UK assessment. Commercial sites also ask for your ECS HS&E assessment pass.

  • IEC 60364
  • BS 7671 (18th Edition)
  • ECS card
  • NVQ Level 3 Electrotechnical
  • Red Seal

Language at work

No official English level is set for this trade. In practice the Experienced Worker Assessment, the BS 7671 exam and the AM2E are all in English, and you must fill in electrical installation certificates, test results and schedules in English. In homes you explain to the customer what you changed and how the new board works.

What electricians earn in United Kingdom.

Sponsored roles in this trade start from about GBP 3,200 a month, based on the code 5241 going rate of GBP 38,800 a year, or GBP 19.90 an hour on a 37.5-hour week. The National Living Wage in 2026 is GBP 12.71 an hour, about GBP 2,065 a month, so the sponsored floor is more than 50% higher. A lower rate of GBP 31,500 applies only to people whose first Certificate of Sponsorship came before 4 April 2024. While you work through the Experienced Worker Assessment you may hold a lower card than the gold one, so ask whether your rate changes when the gold card arrives and write that date and figure into the offer. Travel time between sites and weekend shutdown work are paid on terms set by the contractor.

Typical pay of £3,200 a month gross is 1.5 times the statutory minimum wage of £2,065 (2026).

Before you sign.

Points to settle in writing before you sign a electrician contract in United Kingdom.

  • The offer says which ECS card you will hold when you start, and whether you work supervised until you get the gold card.
  • Your employer pays for the Experienced Worker Assessment and AM2E, or the contract says how much you pay and when.
  • The job title matches code 5241 and pays at least GBP 38,800 a year for 37.5 hours a week.
  • You know whether the work is domestic, commercial or industrial, because each needs different testing and certification paperwork.
  • The employer supplies calibrated test instruments, and the offer lists the hand tools you bring yourself.
  • Weekend shutdown work and travel between sites are paid at a rate written into the contract.
All permit routes United Kingdom

What electricians earn in other countries

Typical monthly gross pay for foreign hires, from official statistics and collective agreements.

FAQ

Questions about working in United Kingdom.

How much do electricians earn in United Kingdom?

Foreign electricians in United Kingdom typically earn £3,200 a month gross.

What do I need before I can work as a electrician in United Kingdom?

Check your qualification is a craft vocational one; Get an Ecctis Industry Skills Statement; Complete the Electrotechnical Experienced Worker Assessment; Pass the ECS Health, Safety and Environmental Assessment; Apply for the ECS gold card.

Which language do I need to work in United Kingdom?

No official English level is set for this trade. In practice the Experienced Worker Assessment, the BS 7671 exam and the AM2E are all in English, and you must fill in electrical installation certificates, test results and schedules in English. In homes you explain to the customer what you changed and how the new board works.

Get found by employers hiring for United Kingdom.

One free profile that employers hiring for United Kingdom and your other chosen destinations can find.

Create your profile

Free. No subscription. No commission on your wages, ever.