Electrician jobs in Poland for foreigners.

Foreign electricians in Poland typically earn PLN 5,700 - PLN 9,800 a month gross. Electricians are no. 3 of 10 on the list of trades Poland recruits from abroad.

Updated September 2026

Electrician at work
Photo: Sid Mbog · CC BY-SA 4.0
Pay and the minimum wageGross pay a month.

Minimum wage 2026PLN 4,806

  • Typical payPLN 5,700 - PLN 9,800

How long it takesWeeks from a signed job offer to a decision on the permit.
  1. Job offer signed
  2. Permit application sent
  3. Decision expected10-24 weeks

Key facts

Typical pay
PLN 5,700 - PLN 9,800 a month gross
Main permit route
Zezwolenie na pracę typu A
Processing time
10-24 weeks
Certificates employers ask for
IEC 60364 · BS 7671 (18th Edition) · ECS card · NVQ Level 3 Electrotechnical · Red Seal
Permits issued by
Wojewoda (Urząd Wojewódzki) - Zatrudnianie cudzoziemców

What electricians do in Poland.

Electrical work in Poland is split between installation firms that wire new flats, offices and warehouses, maintenance teams in factories and shopping centres, distribution network operators, and contractors building solar farms, substations and charging points. On a building site you lay cable routes, mount distribution boards, connect lighting and sockets, and run the insulation and protection measurements before handover. In a factory you look after motors, control cabinets and production lines and react to breakdowns.

The biggest building markets are around Warsaw, Kraków, Wrocław, Poznań, the Tricity and Łódź, while network and renewable projects take you to smaller towns and rural areas. A normal week is five days on site or in the plant. Maintenance staff often add an on-call rota, and network crews are called out after storms. Every task on live equipment follows written work orders and the safety rules of the operator. Roles that plan and sign off other people's work need the dozór scope of the certificate rather than eksploatacja.

Hours and shifts

Your standard is 8 hours a day and an average of 40 hours a week, with at least 11 hours of rest every day and 35 hours each week. Maintenance and network employers often use dyżur (on-call duty). Time on call counts as work only if you are actually called to work. On-call time spent at the workplace is repaid with the same amount of time off, or, if that is impossible, with your basic hourly pay, while on-call time at home is unpaid unless you are called out.

If a breakdown keeps you past your hours, weekday overtime adds 50% and night, Sunday or holiday overtime adds 100%. A 15-minute paid break is due once your day reaches 6 hours.

Recognition and licence, step by step.

What to do, in order, to work as a electrician in Poland.

  1. 01

    Find out which group and scope you need

    Under the Prawo energetyczne and its 2022 regulation, anyone who services, maintains, repairs, installs or measures electrical equipment needs a świadectwo kwalifikacyjne. Group 1 covers electrical installations and networks, split by voltage, for example up to 1 kV. You choose the eksploatacja (operation) scope for hands-on work, or dozór (supervision) to lead others.
  2. 02

    Send the application to a komisja kwalifikacyjna

    You, or your employer for you, send a written or electronic application to a qualification board. It lists your PESEL, or your passport type and number if you have none, your education, your earlier qualifications, your work history and the devices and scope you want. Attach copies of your diplomas and certificates.
  3. 03

    Pay the exam fee

    The fee is 10% of the minimum wage in force on the day you apply, which is PLN 480.60 in 2026 while the minimum stays at PLN 4,806. You pay it to the bank account of the body that set up the board and attach the payment proof to your application.
  4. 04

    Pass the exam on Polish rules

    The board checks your knowledge of how the equipment works, its operation and maintenance rules, work on and near installations, health and safety, fire protection, first aid, and what to do in a failure or fire. A pass gives you the świadectwo kwalifikacyjne, valid until the date printed on it.
  5. 05

    Add site-specific safety training

    Before your first job the employer runs BHP training and arranges the occupational medicine check. Network operators and large plants also give their own instruction on work orders and switching rules before you work on their equipment.

Certificates and language.

Polish employers ask for the świadectwo kwalifikacyjne for Group 1, eksploatacja, up to 1 kV for installation work, and often for higher voltage ranges for network and industrial jobs. Many adverts write this as "uprawnienia SEP". From abroad, an IEC 60364-based training record, an NVQ Level 3 Electrotechnical, a Red Seal or an ECS card helps you show experience, but you still sit the Polish board exam. Work at height and BHP certificates are usually asked for too.

  • IEC 60364
  • BS 7671 (18th Edition)
  • ECS card
  • NVQ Level 3 Electrotechnical
  • Red Seal

Language at work

The board exam follows Polish law and terms, so plan to prepare in Polish and learn the Polish technical terms for your group and voltage range. On site you read Polish drawings, labels and work orders and agree switching steps with colleagues, so clear spoken Polish about safety matters. No CEFR level is written into the regulation.

What electricians earn in Poland.

Electrical jobs pay about PLN 5,700 to 9,800 gross a month in Poland. The lower end is PLN 894 above the 2026 minimum wage of PLN 4,806 for full-time work, and the upper end is a little over twice that minimum. On-call duty at the workplace is paid or repaid as time off, call-outs at night add the 20% night supplement, and overtime adds 50% or 100%. Experience with medium voltage, control systems or solar installations usually lifts pay toward the top of the range.

Typical pay of PLN 5,700 - PLN 9,800 a month gross is 1.2 to 2 times the statutory minimum wage of PLN 4,806 (2026).

Before you sign.

Points to settle in writing before you sign a electrician contract in Poland.

  • Which voltage range and scope (eksploatacja or dozór) does the job need, and will the employer apply and pay the PLN 480.60 board fee?
  • Can you start on lower-voltage tasks while you prepare for the Polish świadectwo kwalifikacyjne exam?
  • How does the on-call rota work, and is on-call time at the workplace repaid with time off or with pay?
  • Who supplies insulated tools, meters and arc-rated protective clothing for live work?
  • Is the job in one plant, or on travelling network and solar sites with lodging paid by the employer?
  • Does the contract name the voltage levels and installations you will work on?
All permit routes Poland

What electricians earn in other countries

Typical monthly gross pay for foreign hires, from official statistics and collective agreements.

FAQ

Questions about working in Poland.

How much do electricians earn in Poland?

Foreign electricians in Poland typically earn PLN 5,700 - PLN 9,800 a month gross.

What do I need before I can work as a electrician in Poland?

Find out which group and scope you need; Send the application to a komisja kwalifikacyjna; Pay the exam fee; Pass the exam on Polish rules; Add site-specific safety training.

Which language do I need to work in Poland?

The board exam follows Polish law and terms, so plan to prepare in Polish and learn the Polish technical terms for your group and voltage range. On site you read Polish drawings, labels and work orders and agree switching steps with colleagues, so clear spoken Polish about safety matters. No CEFR level is written into the regulation.

Get found by employers hiring for Poland.

One free profile that employers hiring for Poland and your other chosen destinations can find.

Create your profile

Free. No subscription. No commission on your wages, ever.