Welder jobs in Poland for foreigners.
Foreign welders in Poland typically earn PLN 5,400 - PLN 8,900 a month gross. Welders are no. 2 of 10 on the list of trades Poland recruits from abroad.
Updated September 2026

Minimum wage 2026PLN 4,806
Typical payPLN 5,400 - PLN 8,900
- Job offer signed
- Permit application sent
- Decision expected10-24 weeks
Key facts
- Typical pay
- PLN 5,400 - PLN 8,900 a month gross
- Main permit route
- Zezwolenie na pracę typu A
- Processing time
- 10-24 weeks
- Certificates employers ask for
- EN ISO 9606-1 · ISO 9606-1 · AWS D1.1 · ASME Section IX · International Welder (IW)
- Permits issued by
- Wojewoda (Urząd Wojewódzki) - Zatrudnianie cudzoziemców
What welders do in Poland.
Welding jobs in Poland sit in steel structure plants, shipyards and ship-repair yards, makers of boilers, tanks and pressure vessels, rail-car and machine builders, and contractors that assemble industrial plants and pipelines. A typical posting asks you to read the welding procedure specification (WPS), set up the machine, prepare and tack the joint, weld in the positions written on your certificate, and grind or clean the seam before inspection. Job adverts name the welding processes by their ISO numbers, such as 135 or 141, so check that your certificate covers the same ones.
Your week depends on whether you stay in one workshop or travel. Workshop staff usually work fixed day shifts or a two-shift pattern, Monday to Friday, with Saturday overtime when an order runs late. Assembly crews travel to a power plant, refinery or factory for several weeks and live in accommodation arranged by the contractor. Joints on equipment that later falls under technical supervision, such as pressure vessels and boilers, are checked by the inspector before the job is signed off, so neat, documented work matters as much as speed.
Hours and shifts
The Kodeks pracy limits you to 8 hours a day and an average of 40 hours a week within the settlement period. Many plants run a second or third shift. Night time is the 8 hours between 21:00 and 07:00, and every hour you weld in that window earns a supplement of 20% of the hourly rate taken from the minimum wage. Where the employer lists a job as especially dangerous or physically heavy, a night worker may not work more than 8 hours in a day.
Overtime on a weekday adds 50% to your hourly pay, and overtime at night, on a Sunday or a public holiday adds 100%. If you need to wait on site ready to work outside your hours (dyżur), that time counts as work only when you actually work, and on-site standby is repaid with equal time off or with pay.
Recognition and licence, step by step.
What to do, in order, to work as a welder in Poland.
- 01
Check which certificate the job needs
Ask the employer which standard and process the work follows. For structures and general fabrication, Polish employers normally ask for a welder qualification test certificate to EN ISO 9606-1 for each process, material group and position. For pressure equipment and other devices under technical supervision, Polish law adds a UDT certificate on top. - 02
Apply to the Urząd Dozoru Technicznego for pressure work
Under the Ustawa o dozorze technicznym, people who weld during the making or repair of technical equipment need a zaświadczenie kwalifikacyjne (qualification certificate). You or your employer send a written application to the UDT with your name, address and PESEL, or your passport number and citizenship if you have no PESEL yet. - 03
Pay the UDT fee and book the test
The fee for checking qualifications is 3.75% of the national average wage announced by the GUS president and valid on the day you apply. You attach proof of payment to the application. You must be at least 18, and you either speak enough Polish to follow the procedure or bring a sworn interpreter yourself. - 04
Take the practical test in front of the commission
A qualification commission appointed by the UDT checks your practical welding and your knowledge of the technical rules, standards and supervision conditions. A positive result gives you the zaświadczenie kwalifikacyjne. A duplicate or exchange of that certificate costs PLN 99 under the 2026 fee regulation. - 05
Keep your papers ready for inspection
Keep the original UDT zaświadczenie kwalifikacyjne and your EN ISO 9606-1 certificates with you on site. If you break the technical supervision rules, the UDT can withdraw the qualification by decision, so follow the welding procedure and inspection steps on every joint.
Certificates and language.
Polish fabricators ask first for EN ISO 9606-1 (written as PN-EN ISO 9606-1 in Poland) for the process, material and positions of the job, with 135, 136 and 141 the most requested. Plants building boilers, tanks and pipelines also ask for the UDT zaświadczenie kwalifikacyjne for welding technical equipment. International projects may also name AWS D1.1, ASME Section IX or the International Welder (IW) diploma. A valid BHP training certificate and the occupational medicine certificate from your pre-employment check complete the file.
- EN ISO 9606-1
- ISO 9606-1
- AWS D1.1
- ASME Section IX
- International Welder (IW)
Language at work
The UDT procedure is held in Polish, and the law asks you either to understand it or to bring a sworn interpreter at your own cost. In the workshop you need enough Polish or English to read a WPS, the drawing and the safety signs, and to follow the foreman's instructions on hot work permits. No CEFR level is set in law for this trade.
What welders earn in Poland.
Welding jobs in Poland pay about PLN 5,400 to 8,900 gross a month. The lower end is PLN 594 above the national minimum of PLN 4,806 that applies in 2026, and the upper end is close to double the minimum. Night hours add 20% of the minimum-based hourly rate, weekday overtime adds 50% and Sunday or holiday overtime adds 100%. Assembly crews on travel often receive travel allowances under the employer's own rules, so ask for them in writing. Pressure-equipment certificates and TIG skills usually move you toward the upper end of the range.
Typical pay of PLN 5,400 - PLN 8,900 a month gross is 1.1 to 1.9 times the statutory minimum wage of PLN 4,806 (2026).
Before you sign.
Points to settle in writing before you sign a welder contract in Poland.
- Which EN ISO 9606-1 processes and positions does the job need, and does the employer pay for a new test if your certificate does not match?
- Does the work include pressure equipment, and who applies and pays the 3.75% UDT fee for your zaświadczenie kwalifikacyjne?
- Who brings and pays the sworn interpreter for the UDT commission if your Polish is not yet enough?
- Is the job in one workshop or on travelling assembly sites, and who pays the lodging and travel between sites?
- Does the contract show the night supplement and the 50% and 100% overtime supplements for welding shifts?
- Who supplies the welding helmet, gloves, fire-resistant clothing and fume extraction, which the employer must provide free of charge?
What welders earn in other countries
Typical monthly gross pay for foreign hires, from official statistics and collective agreements.
Open welder vacancies in Poland.
Recent openings from EURES, the European Commission's job portal. You apply directly with the employer.
- Spawacz K/MPRO-Trailer Sp. z o.o. · PolandNov 21
- Osoba do prac spawalniczychZUW URBEX SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ · PolandNov 20
- Spawacz 135 (k/m)EMMCO POMORZE E&C SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ SPÓŁKA KOMANDYTOWA · PolandNov 20
- Spawacz 121 (k/m)EMMCO POMORZE E&C SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ SPÓŁKA KOMANDYTOWA · PolandNov 20
- Spawacz 138/136 (k/m)EMMCO POMORZE E&C SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ SPÓŁKA KOMANDYTOWA · PolandNov 20
- Spawacz (k/m)PPUH "Intermech" Sp. z o. o. · PolandNov 20
- Spawacz (K/M)"GARBACIAK" GOSPODARSTWO HODOWLANE KÓZ MLECZNYCH · PolandNov 20
- Spawacz/Ślusarz (k/m)ANDRZEJ SKWIERCZ Przedsiębiorstwo Usługowo-Handlowe "Skwiercz-Instal" · PolandNov 20
FAQ
Questions about working in Poland.
How much do welders earn in Poland?
Foreign welders in Poland typically earn PLN 5,400 - PLN 8,900 a month gross.
What do I need before I can work as a welder in Poland?
Check which certificate the job needs; Apply to the Urząd Dozoru Technicznego for pressure work; Pay the UDT fee and book the test; Take the practical test in front of the commission; Keep your papers ready for inspection.
Which language do I need to work in Poland?
The UDT procedure is held in Polish, and the law asks you either to understand it or to bring a sworn interpreter at your own cost. In the workshop you need enough Polish or English to read a WPS, the drawing and the safety signs, and to follow the foreman's instructions on hot work permits. No CEFR level is set in law for this trade.
Welders are also hired in:
Sources
Checked September 2026. Rules change - confirm details with your employer or the authority before you apply.
- Sejm (ISAP) - Ustawa o dozorze technicznym, Dz.U. 2024 poz. 1194
- Minister Finansów i Gospodarki - Opłaty za czynności jednostek dozoru technicznego (Dz.U. 2026 poz. 806)
- Sejm (ISAP) - Kodeks pracy, consolidated text Dz.U. 2026 poz. 1245
- GUS - Structure of wages by occupation, October 2024
- Wojewoda (Urząd Wojewódzki) - Zatrudnianie cudzoziemców
- Ministry of Family, Labour and Social Policy - Minimum wage
Get found by employers hiring for Poland.
One free profile that employers hiring for Poland and your other chosen destinations can find.
Create your profileFree. No subscription. No commission on your wages, ever.