Welder jobs in Saudi Arabia for foreigners.

Welders are no. 4 of 7 on the list of trades Saudi Arabia recruits from abroad.

Updated September 2026

Welder at work
Photo: US Air Force from USA · Public domain
How long it takesWeeks from a signed job offer to a decision on the permit.
  1. Job offer signed
  2. Permit application sent
  3. Decision expected4-12 weeks

Key facts

Main permit route
Work visa
Processing time
4-12 weeks
Certificates employers ask for
EN ISO 9606-1 · ISO 9606-1 · AWS D1.1 · ASME Section IX · International Welder (IW)
Permits issued by
Ministry of Human Resources and Social Development (HRSD)

What welders do in Saudi Arabia.

Welding work in Saudi Arabia comes from steel structure fabricators, pipeline and plant contractors, desalination and power projects, tank builders and repair workshops. The large industrial cities and ports, together with new city developments, keep fabrication shops busy. You prepare bevels, fit up joints, weld plate and pipe, cut with gas or plasma and repair defects found by the inspector.

Welding belongs to the craft occupations (group 7) in the Saudi Standard Classification of Occupations, which puts it under the Skills Verification side of Professional Accreditation. When the Ministry of Human Resources and Social Development (HRSD) began the programme in Egypt, welding was one of the first five fields tested there, alongside four other building and vehicle trades. A normal week is six days in a shop or on site, with Friday off unless your site moves the rest day. Remote project camps often bus crews in before dawn so heavy welding is done in the cooler hours.

Hours and shifts

Your working day is capped at 8 hours and your week at 48. A break of at least 30 minutes comes after five hours of work, and the whole day including breaks stays within 12 hours at the workplace. During Ramadan, Muslim staff work at most 6 hours a day.

Open-air welding stops between 12:00 pm and 3:00 pm from 15 June to 15 September under the Ban Work Under Direct Sunlight decision. In 2026 HRSD made 29,945 inspection visits during that period. Overtime earns your actual hourly wage plus half of your basic hourly wage, or, if you both agree, at least 1.5 hours of time off for each extra hour, used within 60 days.

Recognition and licence, step by step.

What to do, in order, to work as a welder in Saudi Arabia.

  1. 01

    Register for Skills Verification

    Your recruiter or employer registers you on the Professional Verification portal (svp.qiwa.sa) in the welding specialty. The work visa for targeted occupations is linked to passing this test in your own country, at an international examination centre approved by HRSD.
  2. 02

    Book and sit the two tests

    You book a slot for a theoretical test and a practical test. The examiners at the centre check your identity and details before the exam. The practical part is done on real welding work in the specialty you were recruited for.
  3. 03

    Get the certificate before the visa

    Once you pass, the centre issues the Professional Verification certificate. HRSD treats it as an extra requirement in recruitment, so keep the certificate number and a copy ready for the employer and the Saudi mission.
  4. 04

    Check your work permit class on Qiwa

    As a craft occupation, welding is usually classed as Skilled when your total wage meets the Ministry's threshold for your sector and you hold the accreditation. If the wage is below that threshold, the permit is classed as Basic. Ask the employer which class your Qiwa contract will show.
  5. 05

    Pass the client's weld test on arrival

    Project owners and their inspectors usually test you again on the welding procedure of the job. Bring your ISO 9606-1, AWS D1.1 or ASME Section IX records so the inspector knows which processes and positions you already hold.

Certificates and language.

The key Saudi paper is the Professional Verification (Skills Verification) certificate in welding, which the work visa is linked to. Beyond that, contractors ask for welder qualifications to AWS D1.1 for structural steel, ASME Section IX for pressure piping and vessels, or ISO 9606-1, and some value the International Welder (IW) diploma. Bring the originals with the process, position and thickness range on each. Hot-work and confined-space training is given on site. Employers who ignore GOSI's safety instructions can see their occupational hazards contribution doubled from 2% to 4% of wages, so larger yards take safety records seriously.

  • EN ISO 9606-1
  • ISO 9606-1
  • AWS D1.1
  • ASME Section IX
  • International Welder (IW)

Language at work

Saudi welding crews are international, and English is the usual language of drawings, welding procedures and inspection reports, while official forms are in Arabic. You need enough English to read a weld map and a procedure, and to discuss a repair with the inspector. HRSD sets no language level for welding; the verification tests check trade skill.

What welders earn in Saudi Arabia.

Our Saudi data has no salary range for welding, and there is no general minimum wage, so your Qiwa contract sets the figure. Your total wage also decides whether your permit is classed Skilled or Basic, so check it against the class you are promised. Overtime is actual hourly wage plus 50% of basic: HRSD's own example gives SAR 33.33 an hour on a SAR 4,000 basic and SAR 6,000 total wage. Ask whether housing, food and transport are provided or paid as allowances. If you resign after 2 to 5 years with one yard, you receive one third of the end-of-service award, rising to two thirds after 5 years.

Before you sign.

Points to settle in writing before you sign a welder contract in Saudi Arabia.

  • Your employer pays the Skills Verification test fee, travel to the test centre and any retest, and says so in writing.
  • The Qiwa contract shows the welding job title that matches your verification certificate.
  • You know which codes you will weld to, such as AWS D1.1 or ASME Section IX, and who pays the client's qualification test.
  • Your summer shifts are planned around the 12:00 pm to 3:00 pm stop from 15 June to 15 September.
  • Helmet, gloves, leather jacket, safety boots and fume extraction in enclosed spaces are supplied free.
  • You know whether you live in a camp near the yard and how you get to remote project sites.
All permit routes Saudi Arabia

What welders earn in other countries

Typical monthly gross pay for foreign hires, from official statistics and collective agreements.

FAQ

Questions about working in Saudi Arabia.

What do I need before I can work as a welder in Saudi Arabia?

Register for Skills Verification; Book and sit the two tests; Get the certificate before the visa; Check your work permit class on Qiwa; Pass the client's weld test on arrival.

Which language do I need to work in Saudi Arabia?

Saudi welding crews are international, and English is the usual language of drawings, welding procedures and inspection reports, while official forms are in Arabic. You need enough English to read a weld map and a procedure, and to discuss a repair with the inspector. HRSD sets no language level for welding; the verification tests check trade skill.

What is the minimum wage in Saudi Arabia?

Saudi Arabia has no single statutory minimum wage. Pay is set by collective agreements for each sector.

Get found by employers hiring for Saudi Arabia.

One free profile that employers hiring for Saudi Arabia and your other chosen destinations can find.

Create your profile

Free. No subscription. No commission on your wages, ever.