Welder jobs in Germany for foreigners.
Foreign welders in Germany typically earn €3,200 - €3,800 a month gross. Welders are no. 7 of 10 on the list of trades Germany recruits from abroad.
Updated September 2026

Minimum wage 2026€2,409
Typical pay€3,200 - €3,800
- Job offer signed
- Permit application sent
- Decision expected8-26 weeks
Key facts
- Typical pay
- €3,200 - €3,800 a month gross
- Main permit route
- Aufenthaltserlaubnis für Fachkräfte mit Berufsausbildung (§ 18a AufenthG)
- Processing time
- 8-26 weeks
- Certificates employers ask for
- EN ISO 9606-1 · ISO 9606-1 · AWS D1.1 · ASME Section IX · International Welder (IW)
- Permits issued by
- Bundesagentur für Arbeit (Zentrale Auslands- und Fachvermittlung)
What welders do in Germany.
In Germany, welding sits inside the metal trades, and the usual reference occupation is Metallbauer/in. The Recognition Finder describes the job as making steel and metalwork designs and components, architectural elements and everyday objects, then assembling and maintaining them. The three fields are construction technology (Konstruktionstechnik), metal working and commercial vehicle manufacturing. Employers named there include craft metalworking businesses, firms that process metal for building and structural engineering, makers and repairers of metal constructions for industry, vehicle construction businesses and repair workshops.
Your week is split between the welding bay and assembly. In the workshop you read technical drawings, cut and prepare joints, tack and weld parts to a written procedure and check each seam. On assembly days a small team takes the finished stairs, railings, gates, steel frames or vehicle bodies to the building or plant and welds them in place. Industrial employers often start you on the processes you already hold a test for, such as MAG or TIG, and add more once you pass the matching qualification test. Some specialist firms also restore historical metalwork such as fittings and railings, which needs careful hand work.
Hours and shifts
Metalworking hours follow the Arbeitszeitgesetz: eight hours a day, up to ten if the six-month average stays at eight, a 30-minute break once you pass six hours, and 11 hours off before the next start. Plants that run around the clock add late and night shifts. Welding between 23:00 and 06:00 counts as night time, and if no Tarifvertrag sets a rate, the law gives you paid days off or a fair supplement for those hours.
The floor for every hour is the Mindestlohn of EUR 13.90 in 2026. Where your employer is bound by a metal-industry or metal-crafts agreement, its pay group decides your real rate, so ask for the agreement name.
Recognition and licence, step by step.
What to do, in order, to work as a welder in Germany.
- 01
Find your reference occupation
Open the Anerkennungs-Finder and enter Metallbauer/in, or the industrial metal occupation closest to your training. The Finder states that Metallbauer/in is not regulated in Germany, so you may be hired without recognition. A recognition notice still tells employers exactly what you are trained for. - 02
Apply at the Handwerkskammer
For Metallbauer/in the Handwerkskammer of the region where you will work decides, for example the Handwerkskammer Hamburg. Send your certificate, proof of training content and duration, employment references, CV and passport, with German translations by sworn translators. Submit to only one chamber and use its free advice first. - 03
Fee and notice
The Finder gives the Metallbauer fee as approx EUR 100 to EUR 600. The chamber confirms your application within one month and sends the decision no later than three months after the last document arrives. The notice says full, partial or no equivalence. - 04
Weld in front of an examiner
If your papers are incomplete, the Handwerkskammer can run a skills analysis (Qualifikationsanalyse): a work sample or an oral examination in which you weld and explain your work, so the chamber judges your skills directly. - 05
Close any gaps
With partial recognition you can complete refresher training, then file a follow-up application with its certificate to reach full recognition as Metallbauer/in. Running your own Metallbau business later means entering the Handwerksrolle, which usually needs recognition as equal to the German master craftsperson (Meister) qualification. - 06
Use a recognition partnership
If your Metallbau training lasted at least two years and your home country recognises it, an employer in Germany can sign a recognition partnership with you. You then need German at A2, and you finish the Handwerkskammer procedure after you arrive.
Certificates and language.
Employers mainly ask for a valid qualification test to EN ISO 9606-1 for each process, material group and welding position you will use, and they check that the ISO 9606-1 record has been confirmed on time. Firms that build to export codes sometimes ask for AWS D1.1 or ASME Section IX, and supervisors are often expected to hold International Welder (IW) or a higher welding qualification. Your recognition notice as Metallbauer/in from the Handwerkskammer adds weight to these test certificates.
- EN ISO 9606-1
- ISO 9606-1
- AWS D1.1
- ASME Section IX
- International Welder (IW)
Language at work
The Recognition Finder states that no proof of German is needed for the Metallbauer/in recognition itself. In the workshop you still read German welding procedure specifications, drawings and safety instructions, and you agree joint details with the foreman, so basic workplace German matters. Ask which level the employer expects and whether it pays a course. For a recognition partnership, A2 is the minimum.
What welders earn in Germany.
Welding work in Germany typically pays EUR 3,200 to EUR 3,800 gross a month. Set that against the legal floor of EUR 13.90 per hour in 2026, or EUR 2,409 for a full-time month, and the trade sits roughly EUR 800 to EUR 1,400 higher. Night-shift supplements come from the Tarifvertrag where one applies; without one, the Arbeitszeitgesetz gives you paid days off or a fair supplement for hours after 23:00. The Entgeltatlas of the Bundesagentur für Arbeit lists median pay for metal occupations by region.
Typical pay of €3,200 - €3,800 a month gross is 1.3 to 1.6 times the statutory minimum wage of €2,409 (2026).
Before you sign.
Points to settle in writing before you sign a welder contract in Germany.
- Which welding processes, material groups and positions the job needs, and whether your current EN ISO 9606-1 tests cover them.
- Who pays the EN ISO 9606-1 test and any re-test, and whether test time counts as paid working time.
- Whether you weld in the workshop or on assembly sites, and who pays travel and lodging during site weeks.
- Which shift pattern the plant runs and how hours after 23:00 are paid, by Tarifvertrag or by contract.
- Who supplies the welding helmet, gloves, protective clothing and fume extraction at your bay.
- Whether the employer covers the Handwerkskammer fee if you apply for recognition as Metallbauer/in.
What welders earn in other countries
Typical monthly gross pay for foreign hires, from official statistics and collective agreements.
Open welder vacancies in Germany.
Recent openings from EURES, the European Commission's job portal. You apply directly with the employer.
- Rohrleitungsbauer (m/w/d) (Rohrleitungsbauer/in)AKTIV Personal-Service GmbH NL Freiburg · GermanyNov 21
- Schweißer (m/w/d) ab 18,09€/Std. (MAG-Schweißer/in)spp direkt Jena GmbH Niederlassung Sonneberg · GermanyNov 21
- Schweißer (m/w/d) ab sofort (MAG-Schweißer/in)spp direkt Jena GmbH Niederlassung Sonneberg · GermanyNov 21
- Schweißer (m/w/d) ab sofort (Schweißer/in)spp direkt Jena GmbH Niederlassung Sonneberg · GermanyNov 21
- Schweißer (m/w/d) in Eisfeld (Schweißer/in)spp direkt Jena GmbH Niederlassung Sonneberg · GermanyNov 21
- MAG Schweißer (m/w/d) (MAG-Schweißer/in)persona service Verwaltungs AG & Co.KG · GermanyNov 21
- Maschinenanlagenführer mit Staplerschein (Anlagenmechaniker/in)IC TEAM GS Grimma IC TEAM Personaldienste GmbH Zeitarbeit · GermanyNov 21
- Schweißer (m/w/d) (Schweißer/in)persona service AG & Co. KG · GermanyNov 21
FAQ
Questions about working in Germany.
How much do welders earn in Germany?
Foreign welders in Germany typically earn €3,200 - €3,800 a month gross.
What do I need before I can work as a welder in Germany?
Find your reference occupation; Apply at the Handwerkskammer; Fee and notice; Weld in front of an examiner; Close any gaps; Use a recognition partnership.
Which language do I need to work in Germany?
The Recognition Finder states that no proof of German is needed for the Metallbauer/in recognition itself. In the workshop you still read German welding procedure specifications, drawings and safety instructions, and you agree joint details with the foreman, so basic workplace German matters. Ask which level the employer expects and whether it pays a course. For a recognition partnership, A2 is the minimum.
Welders are also hired in:
Sources
Checked September 2026. Rules change - confirm details with your employer or the authority before you apply.
- Anerkennung in Deutschland - Your recognition procedure as Metalworker (Hamburg)
- Anerkennung in Deutschland - Metalworker professional profile
- Gesetze im Internet - Arbeitszeitgesetz § 6
- Bundesagentur für Arbeit - Entgeltatlas
- Bundesagentur für Arbeit (Zentrale Auslands- und Fachvermittlung)
- Bundesregierung - Mindestlohn 2026 (EUR 13.90 per hour)
- Statistik der Bundesagentur für Arbeit - Fachkräfteengpassanalyse 2025
Get found by employers hiring for Germany.
One free profile that employers hiring for Germany and your other chosen destinations can find.
Create your profileFree. No subscription. No commission on your wages, ever.