Welder jobs in Italy for foreigners.

Welders are no. 7 of 8 on the list of trades Italy recruits from abroad.

Updated September 2026

Welder at work
Photo: US Air Force from USA · Public domain
How long it takesWeeks from a signed job offer to a decision on the permit.
  1. Job offer signed
  2. Permit application sent
  3. Decision expected12-30 weeks

Key facts

Main permit route
Nulla osta al lavoro subordinato (Decreto Flussi)
Processing time
12-30 weeks
Certificates employers ask for
EN ISO 9606-1 · ISO 9606-1 · AWS D1.1 · ASME Section IX · International Welder (IW)
Permits issued by
Sportello Unico per l'Immigrazione (Ministero dell'Interno)

What welders do in Italy.

Welding jobs in Italy sit mostly inside the metalworking industry, the largest collective agreement in the country. The CCNL for the private metalworking industry and plant installation (code C011 in the CNEL archive, signed by Federmeccanica, Assistal and Confindustria) covers about 1.7 million employees. Employers range from steel fabricators and machinery makers to firms that install industrial plants, pipework and steel structures on client sites.

Your days usually start with reading the drawing and the welding procedure, then preparing joints, tacking, welding and grinding. Quality staff check the seams, sometimes with non-destructive testing, and you repair what fails. Shop jobs keep you at one site; installation jobs move you between plants and can mean nights away. Ask early whether the job is fabrication in a workshop or erection on site, because the travel, hours and allowances differ.

Hours and shifts

The Ministero del Lavoro's cost table for metalworking, valid from June 2026, counts 2,088 theoretical hours a year, which is 40 hours a week over 52.2 weeks. It sets aside 20 days of holiday, 11 public holidays and 104 hours of paid leave (permessi) a year, plus training hours under the agreement.

Many metal plants run shifts. The same table adds 9.29% to the hourly cost for 24-hour shifts seven days a week, 7.50% for 24-hour shifts Monday to Friday and 3.75% for 16-hour shifts on five or six days. By law your rest between shifts is at least 11 hours in a row.

Recognition and licence, step by step.

What to do, in order, to work as a welder in Italy.

  1. 01

    Get your weld test on paper

    Italian fabricators ask for an EN ISO 9606-1 qualification certificate for each process, material group and position you weld, for example 135 MAG or 141 TIG in PF. If yours has expired, ask the employer to arrange a new test in Italy before you start production work.
  2. 02

    Translate and verify your trade diploma

    Welding is not a regulated profession in Italy, so no state body has to recognise your diploma. If an employer wants your school level confirmed, CIMEA issues a Statement of Comparability for secondary school qualifications, which explains your level but does not bind the employer.
  3. 03

    Complete the safety training at hiring

    Under article 37 of D.Lgs. 81/2008 your employer must give you safety training when you start, when you change tasks and when new equipment arrives. The training covers the specific risks of your work, such as fumes, sparks, hot work and confined spaces, and must suit your language knowledge.
  4. 04

    Get trained on lifting equipment you will use

    Article 73 of the same decree says workers who use equipment needing special skills get specific training and practice. On some machines the Conferenza Stato-Regioni requires an operator qualification (abilitazione). Ask which cranes or lifting platforms the job uses and who organises the course.

Certificates and language.

Expect requests for EN ISO 9606-1 (often written UNI EN ISO 9606-1 in Italian adverts) by process and position. Fabricators that build to international codes also ask for AWS D1.1 or ASME Section IX, and some ask for the International Welder (IW) diploma. Keep the safety training certificate (attestato) from your Italian employer, since it follows you between jobs. Lifting equipment courses are a plus on site and installation work.

  • EN ISO 9606-1
  • ISO 9606-1
  • AWS D1.1
  • ASME Section IX
  • International Welder (IW)

Language at work

Basic Italian helps you read work instructions, safety signs and the welding procedure sheet. Article 37 of D.Lgs. 81/2008 says safety training must take account of your language knowledge, so ask for it in a language you understand if needed. Plant installation teams often mix nationalities, and drawings use international symbols, which helps at the start.

What welders earn in Italy.

Italy has no statutory minimum wage, so your floor is the metalworking CCNL. In the ministry table for June 2026, the annual base pay (retribuzione tabellare) runs from EUR 21,419 at level D1 to EUR 26,537 at level C3 and EUR 28,444 at level B1. That is roughly EUR 1,785 to EUR 2,370 a month over 12 months, before the 13th month (tredicesima) of about EUR 1,850 to EUR 2,470. The table also lists an elemento perequativo of EUR 485 a year, three biennial seniority steps, and EUR 250 a year in flexible benefits. Skilled welders are usually placed above the entry level.

Before you sign.

Points to settle in writing before you sign a welder contract in Italy.

  • Ask which level in the metalworking CCNL you start on, D1, D2, C1 or higher, and when you move up.
  • Ask which processes and positions you will weld and whether your EN ISO 9606-1 certificate covers them.
  • Ask who pays for a new weld test in Italy and for a re-test if the first one fails.
  • Check whether the job is workshop fabrication or installation on client sites, and how travel days are paid.
  • Ask about shift work and which shift pattern the plant runs, since it changes your nights and weekends.
  • Ask who supplies the welding mask, fume extraction and fire-resistant clothing, and get it in writing.
All permit routes Italy

What welders earn in other countries

Typical monthly gross pay for foreign hires, from official statistics and collective agreements.

FAQ

Questions about working in Italy.

What do I need before I can work as a welder in Italy?

Get your weld test on paper; Translate and verify your trade diploma; Complete the safety training at hiring; Get trained on lifting equipment you will use.

Which language do I need to work in Italy?

Basic Italian helps you read work instructions, safety signs and the welding procedure sheet. Article 37 of D.Lgs. 81/2008 says safety training must take account of your language knowledge, so ask for it in a language you understand if needed. Plant installation teams often mix nationalities, and drawings use international symbols, which helps at the start.

What is the minimum wage in Italy?

Italy has no single statutory minimum wage. Pay is set by collective agreements for each sector.

Get found by employers hiring for Italy.

One free profile that employers hiring for Italy and your other chosen destinations can find.

Create your profile

Free. No subscription. No commission on your wages, ever.