HVAC technician jobs in United Kingdom for foreigners.

Foreign HVAC technicians in United Kingdom typically earn £3,400 a month gross. HVAC technicians are no. 4 of 7 on the list of trades United Kingdom recruits from abroad.

Updated September 2026

HVAC technician at work
Photo: U.S. Air Force AFCENT by Airman 1st Class Derrick Bole · Public domain
Pay and the minimum wageGross pay a month.

Minimum wage 2026£2,065

  • Typical pay£3,400

How long it takesWeeks from a signed job offer to a decision on the permit.
  1. Job offer signed
  2. Permit application sent
  3. Decision expected4-12 weeks

Key facts

Typical pay
£3,400 a month gross
Main permit route
Skilled Worker visa
Processing time
4-12 weeks
Certificates employers ask for
EU F-Gas Certificate · EPA Section 608 · City & Guilds 2079 · Red Seal
Permits issued by
UK Visas and Immigration

What HVAC technicians do in United Kingdom.

In the UK this trade is listed as occupation code 5225, Air-conditioning and refrigeration installers and repairers. Employers include building services contractors fitting air conditioning in offices and shops, refrigeration firms looking after supermarket cold rooms and display cases, heat pump installers working on homes, and service companies with maintenance contracts across a region. Refrigerated trucks over 3.5 tonnes and trailers are part of the regulated work too.

A typical week mixes installation days, when you mount indoor and outdoor units, run and braze copper lines, pull a vacuum and pressure test, with service visits for leak checks, refrigerant recovery and fault finding on compressors, fans and controls. A new fixed air-conditioning installation counts as building work that the building regulations cover, so the contractor either notifies building control or self-certifies as a registered installer. Supermarket and food plant contracts bring urgent visits when a cold room fails, because chilled and frozen stock is at stake.

Hours and shifts

Cold rooms, supermarket cases and data centre cooling need cover around the clock, so service employers often run a standby rota on top of the base week. The code 5225 going rate is calculated on 37.5 hours, and pro-rated for longer or shorter contracts. Time spent actually working on a breakdown adds to your hours, and the law limits the total to an average of 48 a week over 17 weeks without your signed opt-out. After a night breakdown the 11-hour daily rest rule still applies before your next shift. Technicians who regularly work 3 or more hours between 11pm and 6am count as night workers, with an 8-hour average limit in each 24. The standby fee and the call-out rate come from your contract.

Recognition and licence, step by step.

What to do, in order, to work as a HVAC technician in United Kingdom.

  1. 01

    Check your F gas certificate

    Under GB F gas rules you need a qualification to install, service, leak check, recover gas from or decommission stationary refrigeration, air conditioning and heat pump systems. An equivalent qualification recognised by an EU member state is accepted, so an EU F-Gas Certificate in Category 1 lets you work across all of these tasks.
  2. 02

    Take a GB F gas qualification if yours is not from the EU

    Category 1 covers all activities; Category 2 covers systems with under 3 kg of F gas (under 6 kg if hermetically sealed). City and Guilds, BESA and LCL Awards issue the qualifications; CITB no longer does.
  3. 03

    Get an Ecctis statement for your trade diploma

    For a CSCS card on construction sites, Ecctis maps your refrigeration qualification with an Industry Skills Statement (GBP 435 + VAT, about 30 working days).
  4. 04

    Plan for gas registration only if the role includes boilers

    Air conditioning and heat pumps use no fuel gas, so F gas papers cover most of this trade. Where a job also takes in gas-fired heating or hybrid heat pump and boiler systems, you join the Gas Safe Register first; certificates of gas competence come from an accredited certification body that sends your evidence straight to the register.
  5. 05

    Confirm your employer's company certificate

    Firms, including sole traders, that service F gas equipment for others must be certified by an approved body such as Refcom or Bureau Veritas, renewed every 3 years. Your work is recorded under that certificate.

Certificates and language.

Employers in this trade ask for an F gas certificate, usually Category 1, either a GB one such as City & Guilds 2079 or an equivalent EU F-Gas Certificate. Heat pump and heating work adds Gas Safe ACS papers where gas is involved. Site work needs a CSCS card with a CITB HS&E pass. EPA Section 608 or a Red Seal from North America shows experience, but you still need the GB or EU F gas qualification before you handle refrigerant here.

  • EU F-Gas Certificate
  • EPA Section 608
  • City & Guilds 2079
  • Red Seal

Language at work

No English level is fixed by law. You need English to complete F gas log books and leak check records, read manufacturers' installation manuals and pressure test sheets, and explain faults to a store manager or facilities team. F gas assessments from City and Guilds, BESA or LCL Awards are taken in English, and refrigerant safety data sheets and building control paperwork are written in English too.

What HVAC technicians earn in United Kingdom.

Cooling and refrigeration jobs with a sponsor begin at roughly GBP 3,400 each month. Code 5225 sets GBP 41,100 a year as its going rate, or GBP 21.08 hourly. Compared with the legal floor of GBP 12.71 hourly in 2026 (near GBP 2,065 monthly), the sponsored rate is about 65% higher. Technicians whose first sponsorship certificate dates from before 4 April 2024 may be paid from GBP 35,500. Standby allowances, call-out fees and private use of the company van are agreed with each employer and belong in the written offer.

Typical pay of £3,400 a month gross is 1.6 times the statutory minimum wage of £2,065 (2026).

Before you sign.

Points to settle in writing before you sign a HVAC technician contract in United Kingdom.

  • The offer says which F gas category you need and whether the employer pays for a GB qualification if yours is not accepted.
  • The company holds a current F gas company certificate from Refcom, Bureau Veritas or another approved body.
  • Standby rota, call-out pay and rest after night breakdowns are written into the contract.
  • Your pay reaches GBP 41,100 a year on a 37.5-hour week for code 5225, before any standby or call-out money is added on top.
  • The employer supplies recovery machines, gauges, leak detectors and a van, or the offer lists your own tools.
  • If the job includes gas boilers or heating, the employer covers your ACS assessments and Gas Safe fee.
All permit routes United Kingdom

What HVAC technicians earn in other countries

Typical monthly gross pay for foreign hires, from official statistics and collective agreements.

FAQ

Questions about working in United Kingdom.

How much do HVAC technicians earn in United Kingdom?

Foreign HVAC technicians in United Kingdom typically earn £3,400 a month gross.

What do I need before I can work as a HVAC technician in United Kingdom?

Check your F gas certificate; Take a GB F gas qualification if yours is not from the EU; Get an Ecctis statement for your trade diploma; Plan for gas registration only if the role includes boilers; Confirm your employer's company certificate.

Which language do I need to work in United Kingdom?

No English level is fixed by law. You need English to complete F gas log books and leak check records, read manufacturers' installation manuals and pressure test sheets, and explain faults to a store manager or facilities team. F gas assessments from City and Guilds, BESA or LCL Awards are taken in English, and refrigerant safety data sheets and building control paperwork are written in English too.

Get found by employers hiring for United Kingdom.

One free profile that employers hiring for United Kingdom and your other chosen destinations can find.

Create your profile

Free. No subscription. No commission on your wages, ever.